The Article Home

[ad#ads]

How to Make Colloidal Silver

For thousands of years, silver is known as a powerful antibiotic. In ancient Greece, they lined their eating utensils and drinking vessels with the metal in order to keep bacteria and other contaminants away. The pioneers of the American West used to place a silver dollar in a jug of milk so it remains fresh even without refrigeration.

Now, here’s a question that not many people think to ask: Why is silverware made from silver? The reason is that silver can kill bacteria in the span of six minutes or less from first contact.

With that said, colloidal silver consists of tiny particles of silver that are suspended in liquid. It is widely available today as a supplement although it has no FDA approval as of yet. The substance is said to prevent infections and help speed up tissue formation during the healing process.

Unfortunately, colloidal silver products available in the market today are sold at $60.00 or more. While some people may be able to afford that much if only to help boost the body’s immune system, $60.00 for eight ounces of beneficial colloidal silver can burn a hole in others’ pockets.

The good news is that how to make colloidal silver is a simple enough for a do-it-yourself plan. Here are the stuffs you need in how to make colloidal silver:

* 3 transistor radio batteries (9 volts each)
* 2 alligator clips (with insulation)
* 1 “grain of wheat” 40 mA sub miniature incandescent bulb (24 volts)
* 12 inches of 3/32” heat-shrink insulation tubing
* 12 inches of 2-conductor stranded insulated wire for clip leads
* 1 small box used as container
* 10 inches of pure silver wire (.999 fine)

After you have gotten all that you need (it should cost you around $30.00), it’s time for you to construct the generator. Don’t worry; it’s simple.

The first step in how to make colloidal silver is to solder the three batteries to the snap-on battery clips. Make sure you solder them red to black. You now have 27 volts worth of battery power. Now, take your 24V incandescent lamp and connect it in series with either negative or positive output lead.

Next in how to make colloidal silver, solder the red-insulated alligator clip to connect it with the positive while the black-insulated alligator clip to the negative lead wires. To shrink down insulation in the soldered connections, just use a heat gun or a hair dryer.

Then, take your 10” silver wire and cut it to about half, bending the top ends. This will allow the wires to clip over the top rim of a glass. Make sure to use only plastic or glass, never metal.

And with that, your homemade colloidal silver generator is done. You’re now ready for the next step in how to make colloidal silver, which is to pour about eight ounces of water into the glass. Next, add one to two drops of saline solution. Stir using plastic or any non-conductive utensil.

Then, place the silver electrode wires into the solution, attaching the alligator clips to the ends over the rim of the glass. Notice a grey mist inside the glass and bubbles rising. At this point, the silver colloid of approximately 1 ppm is being created.

[ad#ads]

[ad#ads]

Home Made Colloidal Silver Generator

Regardless of the much debated topic of colloidal silver benefits, it cannot be denied that silver has properties that would make it a powerful antibiotic. The only question left for science to answer is how to process silver and convert it into a form that would be most beneficial to the body and at the same time safe. And with today’s advances in technology, that question won’t remain a question for long.

As a matter of fact, it was lately discovered that most of the important fluids in the body are colloids. That is, they are made up of tiny particles of vitamins, minerals, and nutrients that are suspended in a water solution. Blood can perform its function of transporting nutrients much better this way so the body can easily absorb and make use of them.

This principle is applied in colloidal silver using a process called electrolysis, wherein tiny silver particles are drawn out of a larger silver piece into the fluid. The electrical impulses, produced by a battery-powered generator, keep these particles from settling so they remain suspended and resistant to the actions of gravity.

Producing colloidal silver on your own is relatively easy. In fact, with a design for a home made colloidal silver generator and materials, such as batteries and a piece of pure silver, you should be able to do it yourself.

Below is a brief description of a basic design for a home made colloidal silver generator.

What You Need

* Transistor radio batteries
* Lead connectors
* Alligator clips (with insulation)
* Incandescent bulb
* Pure silver (.999 fine)

Depending on the home made colloidal silver generator you are using, you may need to add a few more materials in there. But for purposes of this article, those are what you basically need in order to start producing your own home made colloidal silver solution.

The Process

Electrolysis works like a magnet. That’s why, it is sometimes referred to as “electromagnetism.” Basically, your home made colloidal silver generator will provide electrical impulses through wires connected to it. The electrical impulses will create a sort of magnetic field between the silver and your liquid base (usually distilled water), causing the silver particles and ionic silver to be drawn out.

Since each sub-atomic particles of the silver have been electrically charged, they now have enough energy to sustain them and lend additional buoyancy.

The silver will cause the liquid solution to look a bit yellowish. However, they should not be gray; otherwise, that is an indication that the silver particles are not the ideal size optimized for your body to absorb.

When using your home made colloidal silver generator, be sure to use only clear glass. Plastic is recommended by some, but plastic may contain some chemicals that may be harmful. Glass, on the other hand, presents no danger when using home made colloidal silver generator.

[ad#ads]